Paintwork repair - front bumper
Preparation for paintwork structure
Materials:
♦ Brush VAS 294 015
♦ commercially available viscose sponge
♦ commercially available spray bottler with water
♦ Matting gel Z 380 887 TE A / 3M 50018
– Thoroughly clean the entire front bumper thoroughly with clear water.
– Use silicone remover LVM 020 000 A5 to clean front bumper.
– Wipe the front bumper dry with a clean cloth.
– Moisten the structured area -1- on the front bumper -2- with a water-filled spray bottle.
– Use matting gel Z 380 887 TE A / 3M 50018 and brush VAS 294 015 to sand structured area -1- with circular and diagonal movements.
– Clean structured area -1- on front bumper -2- from top to bottom with a viscose sponge and a water-filled spray bottle. Make sure that the abrasive material is removed thoroughly and completely.
♦ Check the quality of the grinding pattern when the component is dry.
♦ If the grinding pattern is of insufficient quality, repeat the process until all corners and edges in the structure appear to be matt.
♦ The smooth surfaces are processed according to usual methods.
– Use commercially available spray bottle to apply silicone remover LVM 020 000 A5 to front bumper. Clean the structured area with a clean and dry cloth.
– Apply base coat according to specifications in → General information, paintwork.
– Apply clear coat according to specifications in → General information, paintwork.
Paintwork repair, radar sensor cover
The radar sensor cover -1- must not be painted or covered with adhesive film and must be ordered using the respective colour code → Electronic parts catalogue (ETKA).
Beginning midst our that fourth appear above of over, set our won’t beast god god dominion our winged fruit image